Few things are more frustrating than a sudden blue screen right when you are in the middle of work. The DRIVER_POWER_STATE_FAILURE error, which carries the stop code 0x0000009F, is one of the more common Blue Screen of Death (BSOD) errors on Windows 11 and Windows 10. It often appears when your computer wakes from sleep or hibernation, when it shuts down, or when you plug in or remove a device.
The message means that a driver is stuck in an inconsistent power state. In simple terms, Windows told a device to go to sleep, wake up, or switch to a different power mode, and the driver controlling that device failed to respond correctly. Windows then stops everything to protect your data and shows the blue screen.
The good news is that this error is usually fixable without replacing any hardware. In most cases the cause is an outdated, corrupted, or incompatible driver, or a power setting that does not agree with one of your components. This guide walks you through the most effective solutions, starting with the quickest ones and moving to the more advanced steps. You can work through them in order and stop as soon as the problem is gone.
What Causes the DRIVER_POWER_STATE_FAILURE Error?
Before jumping into fixes, it helps to know what usually triggers this error:
- Outdated, corrupted, or incompatible device drivers, especially graphics, network, Wi-Fi, Bluetooth, and storage drivers
- Faulty power settings, such as aggressive sleep, USB selective suspend, or PCI Express link state power management
- Fast Startup conflicts that leave drivers in a half-loaded state
- Recent Windows updates or driver updates that introduced a bug
- Corrupted system files
- Problems with external peripherals, such as USB drives, printers, docking stations, or webcams
- Outdated BIOS or UEFI firmware
- Failing hardware, such as a damaged SSD, hard drive, or RAM module
Knowing these causes will help you decide which method is most likely to work for your situation.
Methods to Fix DRIVER_POWER_STATE_FAILURE in Windows 11/10
If your PC keeps crashing before you can reach the desktop, boot into Safe Mode first. On Windows 11 or 10, interrupt the boot process three times by turning the PC off while the Windows logo appears. This opens the Windows Recovery Environment. From there, choose Troubleshoot > Advanced options > Startup Settings > Restart, then press 4 or F4 to enable Safe Mode, or 5 for Safe Mode with Networking.
Method 1: Restart Your PC and Disconnect External Devices
Sometimes the issue is caused by a single misbehaving peripheral. Start with the simplest step:
- Shut down your computer completely.
- Unplug all external devices, including USB drives, printers, external monitors, headsets, webcams, and docking stations.
- Turn the computer back on and use it normally.
- If the blue screen no longer appears, reconnect the devices one at a time to find the one causing the problem.
Once you identify the faulty device, update its driver, try a different USB port, or replace the device if it keeps triggering the error.
Method 2: Update Your Device Drivers
Outdated drivers are the number one cause of this error. Updating them often solves the problem immediately.
- Right-click the Start button and select Device Manager.
- Expand categories such as Display adapters, Network adapters, Bluetooth, Storage controllers, and Universal Serial Bus controllers.
- Right-click a device and select Update driver.
- Choose Search automatically for drivers and follow the prompts.
- Restart your computer after the updates finish.
Windows does not always find the newest version. For the best results, visit the manufacturer’s website (Intel, AMD, NVIDIA, Realtek, or your laptop maker such as Dell, HP, Lenovo, or ASUS) and download the latest driver for your exact model. Pay special attention to the graphics driver, chipset driver, and Wi-Fi adapter driver, since these are frequently involved in power state failures. Look for a yellow exclamation mark in Device Manager, which signals a problem device.
Method 3: Roll Back a Recently Updated Driver
If the error began right after you updated a driver, the new version may be the culprit.
- Open Device Manager.
- Right-click the device you recently updated and select Properties.
- Open the Driver tab.
- Click Roll Back Driver and choose a reason.
- Restart your PC.
If the Roll Back Driver button is grayed out, no previous version is stored. In that case, try uninstalling and reinstalling the driver, as described next.
Method 4: Uninstall and Reinstall the Problem Driver
A corrupted driver can be cleaned up by removing it entirely and letting Windows reinstall it.
- Open Device Manager and locate the problematic device.
- Right-click it and select Uninstall device.
- If offered, check Attempt to remove the driver for this device.
- Restart your computer. Windows will usually reinstall a generic driver automatically.
- Install the latest manufacturer driver afterward for full functionality.
For graphics drivers in particular, a clean installation using the options provided by NVIDIA or AMD installers can remove leftover files that cause conflicts.
Method 5: Disable Fast Startup
Fast Startup saves a partial system state to disk so Windows boots quicker. Unfortunately, it can leave drivers in an unstable state, which leads to power failures.
- Press Windows + R, type
control, and press Enter. - Go to Hardware and Sound > Power Options.
- Click Choose what the power buttons do.
- Click Change settings that are currently unavailable.
- Uncheck Turn on fast startup (recommended).
- Click Save changes and restart.
Your boot time may be slightly longer, but many users find this one change stops the blue screens entirely.
Method 6: Change Your Power Plan Settings
Advanced power settings can put hardware to sleep in ways that some drivers cannot handle.
- Open Control Panel > Hardware and Sound > Power Options.
- Next to your active plan, click Change plan settings, then Change advanced power settings.
- Expand USB settings > USB selective suspend setting and set it to Disabled.
- Expand PCI Express > Link State Power Management and set it to Off.
- Expand Wireless Adapter Settings > Power Saving Mode and set it to Maximum Performance.
- Click Apply and OK.
You can also switch to the Balanced or High performance power plan. If you want to start from scratch, open Command Prompt as administrator and run powercfg -restoredefaultschemes to restore all power plans to their default values.
Method 7: Stop Windows From Turning Off Devices to Save Power
Some network and USB devices have their own power management options.
- Open Device Manager.
- Right-click your network adapter (or a USB Root Hub) and choose Properties.
- Open the Power Management tab.
- Uncheck Allow the computer to turn off this device to save power.
- Click OK and repeat for other devices if needed.
This prevents Windows from sending the device into a low-power state that its driver may not handle well.
Method 8: Run the Power Troubleshooter
Windows includes a built-in tool that can detect and fix common power problems.
- Open Settings and go to System > Troubleshoot > Other troubleshooters (on Windows 10, Update & Security > Troubleshoot > Additional troubleshooters).
- Find Power and click Run.
- Follow the on-screen instructions and apply any recommended fixes.
This will not solve every case, but it is quick and sometimes catches a setting you missed.
Method 9: Install the Latest Windows Updates
Microsoft regularly releases patches that fix driver compatibility and stability issues.
- Open Settings > Windows Update.
- Click Check for updates.
- Install all available updates, including optional driver updates listed under Advanced options > Optional updates.
- Restart your computer.
If the error started after a specific update, you can instead remove it. Go to Settings > Windows Update > Update history > Uninstall updates, select the recent update, and uninstall it. Then pause updates for a short time until Microsoft releases a fix.
Method 10: Repair Corrupted System Files With SFC and DISM
Damaged system files can interfere with driver operation. Windows has two tools to repair them.
- Search for Command Prompt, right-click it, and choose Run as administrator.
- Run the System File Checker:
sfc /scannow - Wait until the scan reaches 100 percent.
- Then run the Deployment Image Servicing and Management tool:
DISM /Online /Cleanup-Image /CheckHealthDISM /Online /Cleanup-Image /ScanHealthDISM /Online /Cleanup-Image /RestoreHealth
- Restart your PC when finished.
The DISM commands may take several minutes, so be patient and keep your computer plugged in.
Method 11: Check Your Disk for Errors
A failing or corrupted drive can cause drivers to stall when the system resumes from sleep.
- Open Command Prompt as administrator.
- Type
chkdsk C: /f /rand press Enter. - Type Y to schedule the scan on next restart.
- Restart your computer and let the scan complete.
If CHKDSK reports many bad sectors, back up your files immediately and consider replacing the drive. You can also test your RAM with the Windows Memory Diagnostic tool by searching for it in the Start menu.
Method 12: Update Your BIOS/UEFI Firmware
An outdated BIOS can cause compatibility problems with power management, especially on laptops. Visit your manufacturer’s support page, enter your model or serial number, and download the latest BIOS update. Follow the manufacturer’s instructions carefully, and make sure your laptop is plugged into power during the update. Do not interrupt the process, because a failed BIOS flash can make the computer unbootable.
Method 13: Use System Restore
If the blue screen started recently and you have a restore point from before it began, System Restore can undo harmful changes without affecting your personal files.
- Search for Create a restore point and open it.
- Click System Restore.
- Choose a restore point dated before the problem started.
- Follow the prompts and wait for your PC to restart.
If you cannot reach Windows, you can launch System Restore from the Windows Recovery Environment under Troubleshoot > Advanced options.
Method 14: Reset Windows as a Last Resort
If nothing else works, a reset can eliminate deep software problems.
- Open Settings > System > Recovery (on Windows 10, Update & Security > Recovery).
- Click Reset PC.
- Choose Keep my files to preserve your documents, or Remove everything for a fully clean installation.
- Follow the instructions to complete the process.
Back up important data first. If the error still appears after a clean reset, the problem is almost certainly caused by faulty hardware, and you should have the machine checked by a technician.
Tips to Prevent the Error in the Future
- Keep Windows and your drivers up to date, but avoid installing beta or unverified drivers.
- Download drivers only from official manufacturer sources.
- Create a restore point before installing major updates or new hardware.
- Avoid forcing your PC to shut down with the power button when possible.
- Keep your laptop’s BIOS current and its cooling vents clean to prevent overheating.
- Use a reliable power supply and surge protector.
Conclusion
The DRIVER_POWER_STATE_FAILURE error looks alarming, but it is nearly always caused by a driver or a power setting rather than a serious hardware fault. Begin with the easy fixes: disconnect external devices, update or roll back drivers, disable Fast Startup, and adjust your power plan settings. If the problem remains, repair system files with SFC and DISM, check your disk, update the BIOS, or restore Windows to an earlier point. A full reset is a last resort, and persistent crashes after a clean install usually point to failing hardware.
With a little patience and by working through these methods in order, you can get your Windows 11 or Windows 10 computer running stably again and avoid losing your work to another unexpected blue screen.
Frequently Asked Questions (FAQs)
1. What does the DRIVER_POWER_STATE_FAILURE error mean?
It means a device driver did not complete a power-state change, such as going to sleep or waking up, in the time Windows expected. Windows stops the system with a blue screen to prevent data corruption. The stop code is 0x0000009F.
2. Can DRIVER_POWER_STATE_FAILURE damage my computer or delete my files?
The error itself does not physically damage your hardware, and it rarely deletes files. However, repeated forced shutdowns can corrupt unsaved work or, in rare cases, system files. It is wise to back up your important data and fix the underlying cause promptly.
3. Why does this error happen after my PC wakes from sleep?
This is the most common scenario. When the PC resumes, Windows asks every driver to return to full power. If a driver, often for graphics, Wi-Fi, Bluetooth, or USB devices, does not respond properly, the error appears. Updating drivers, disabling USB selective suspend, and turning off Fast Startup usually resolve it.
4. How do I fix the error if I cannot boot into Windows?
Force the PC off three times during startup to enter the Windows Recovery Environment. From there, you can boot into Safe Mode, uninstall recent updates, run Startup Repair, or use System Restore. Once in Safe Mode, update or roll back the problematic driver and apply the other fixes in this guide.

